flexdrive-10

the flexdrive-10 series linear positioning tables, configured with a Ball screw drive for high-performance positioning applications where high accuracy, longer travels, and high-load carrying capacities are required.

  • Environmentally hardened.
  • Long travel 300 - 1200 mm.
  • Heavy-duty design with multi-track precision guide system for load capacity up to 135 kg.
  • High stiffness, constant support geometry saddle accepts loading from multiple directions.
  • High speeds to 900 mm/sec.
Other Screw Driven Stages

flexdrive-10 Features & Benefits

The flexdrive-10 series is an expansion of the product line to a small compact size and the modular design makes it an ideally suited translation module for a larger number of applications requiring precision, reliability and ease of integration. Engineers, system integrators and designer prefer the flexdrive-10 for their superb performance, flexibility to match to the application and assured longevity.

The flexdrive-10 series is a very compact precision stage based on a monolithic high strength aluminum alloy with a 93 x 310 mm envelope and travel range from 300 - 1200 mm.  The payload capability is rated at 135 kg (300 lbs).  The superb positioning performance is supported by square rails with recirculating low noise linear ball bearings and a precision ground ballscrew drive.

Applications

This positioning stage is designed as a fine precision machine with selected high-performance components to achieve outstanding positioning performance with extended life expectancy.

The stage base is fabricated from a specially selected hardened high-strength aluminum alloy slab, precision machined to extremely close tolerances. In addition, the saddle is equipped with a wear resistant hard-coat anodized protective finish.

The guide system features advanced technology multi-track linear bearings. The four integrally preloaded bearing carriages establish the proper stiffness and achieve constant support geometry for the saddle. This precise and rigid motion platform produces exceptional results in terms of accuracy and motion trajectory, even with high payload.

Custom Options

  • Side Motor Mounting for motor orientation parallel to direction of motion. 

Discuss your needs with a Nutec Engineer

flexdrive-10 Specifications

fd-1012 fd-1018 fd-1025 fd-1036 fd-1048
Travel Length 300 mm 450 mm 600 mm 900 mm 1200 mm
Ball screw Diameter 20 mm 20 mm 20 mm 20 mm 20mm
Ball screw lead 5 mm 5 mm 5 mm 5 mm 5 mm
Optional Lead 10 mm 10 mm 10 mm 10 mm 10 mm
Trajectory Control
Accuracy
Rotary Encoder ± 20 μm ± 25 μm ± 30 μm ± 30 μm ± 50 μm
Linear Encoder ± 10 µm ± 15 µm ± 20 µm ± 20 µm ±  30 µm
Straightness/Flatness ± 2.0 µm ± 3.0 µm ± 3.5 µm ± 4.0 µm ± 5.0 µm
Yaw/Pitch/Roll 20 arc-sec 30 arc-sec 40 arc-sec 50 arc-sec 60arc-sec
2 Axis System
Orthogonality
Standard Grade 10 arc-sec 10 arc-sec 10 arc-sec 10 arc-sec 10arc-sec
High Precision 5 arc-sec 5 arc-sec 5 arc-sec 5 arc-sec 5 arc-sec
FD-10-SP
Travel Length 300-1200 mm
Drive System BSM 60
Maximum Acceleration Payload Dependent
Maximum Speed 400 mm/s
Maximum Thrust 500 N
Recommended Payload Limit 135 kg / 300 lbs

Notes

  • Accuracy Described on Full System Travel
  • Straightness/Flatness Described per 100 mm travel
  • All Trajectory data based on axis uniformly supported over full length on precision mounting surface with vibration isolation
  • Payload capacities are recommended values to achieve maximum lifetime in the worst-case scenario featuring maximum dynamic operation and off center loading
  • Force, acceleration and speed performance are based on operations with NUTEC MICROMATIC digital servo controller.

About Us

NUTEC Mechatronic Systems' positioning is based on perfection. Engineering and design are focused on details and balanced design, flawless fabrication and precision machining to exacting standards and consistent quality.

Nutec Components
631-242-1225
[email protected]
81 Jefryn Boulevard East
Deer Park, NY 11729

Quick Links

Working Hours

Call us or email us for formal quotations. We can be reached during the week at these times.

  1. Monday-Friday: 7:30am to 4:00pm
  2. Weekends: Closed

Contact Us

Fill out the form below and we'll get back to you.