T-Max Series

T-Max™ series of precision, direct-drive rotary servo positioning stages are ideal for today’s high performance technology environment. They are found in virtually all industries where intermittent part indexing, skew adjustment or precise angular alignment, continuous rotation and exact angular positioning is required.

  • Low Profile Direct-drive Rotary Stage
  • Smooth Brushless Servo-drive Positioning Motion
  • Integrated High resolution Rotary Encoder
  • High Stability Double pre-loaded Hub Bearing System
Other Rotary Stages

T-Max Series Features & Benefits

T-Max series of rotary stages provide smooth, low friction rotary motions over a large speed range with zero-backlash. These are key advantages in any application where excellent trajectory control is required. T-Max positioning stages operate with low vibration and superior flatness. These are attractive features in any precision application. Closed-loop rotary position control coupled with direct drive technology creates a robust rotating hub with low-hysteresis and remarkable angular resolution.  The single piece rotating hub design affords rugged mechanical stability, integrity and increased precision under load. The double preloaded hub with a crossed-roller top bearing and duplex angular ball bearing at the bottom offers extreme stiffness and outstanding dynamic characteristics with low axial and radial run out even at maximum load. A top ball bearing configuration is available for low drag, damping and compliance as an option.

Applications

T-Max series rotary positioning stages are designed for precise motor driven rotary positioning and indexing. These rotary tables are intended to function independently or in conjunction with other positioning components used in high precision and automation applications. A low-profile design minimizes stacking height and Abbé error in multi-axis configurations and enables T-Max to fit where other motorized devices cannot.

T-Max models are available with 67, 98, 136 and 200 mm hub diameters in several resolution ranges configured to match speed and positioning requirements of your application.

T-Max Accessories

A range of specialized configuration rotary positioning stages, based on the essential components of the T-Max stages are available to meet almost every application. Variants of these rotational stage products can be adapted for use in either clean rooms, vacuum chambers or sealed for operation in harsh environments while preserving all of their desirable high performance characteristics. Our Labyrinth seal protects T-Max from dust and spraying water, providing ingress protection rating IP53.  These positioning stages can be factory equipped, tuned and tested with user supplied or custom or custom fabricated brackets gimbals and other tooling including a variety of work-holding collets, 3-jaw chucks and collet closing systems.

Rotary Stage Resolution

Resolution is defined as the smallest angular value, which can be detected by the evaluating electronics as the hub turns relative to the base.  Resolution is developed by the combined effect of the scale grating pitch, specified in lines per revolution (lpr) and an electronic multiplying factor, determined by the counting electronics.

Three configurations of electronic pulse counting systems are available in the T-Max product. All T-Max positioning stages share the same native analogue 1 Volt P-P encoder read head. This output is directly compatible with our MICROMATICseries controllers and most other high-performance servo controllers.

Lower cost and performance controllers may require direct TTL encoder input signals. T-MAX system accomplishes this with an in-line analog to TTL pulse for signal conditioning. The In-line TTL conversion is achieved with a defined interpolation factor, 1x, 25x, or 100x.  Contact factory for other interpolation factors.

T-Max Resolution

T-Max 2

 Encoder Output  Grating Disk  Interpolator*  Quadrature Edge   Detection  Resolution  Max Speed
 Analog 1 V(p-p)  3,600 lpr  In-Controller  Not Applicable  0.1° / cycle
 TTL-9.0  3,6000 lpr  10x   X4  9.0 arc-sec  889 rpm
 TTL-0.9  3,6000 lpr  100x   X4  0.9 arc-sec  444 rpm

T-Max 3

 Encoder Output  Grating Disk  Interpolator*  Quadrature Edge   Detection  Resolution  Max Speed
 Analog 1 V(p-p)  10,000 lpr  In-Controller  Not Applicable  0.036° / cycle
 TTL-3.25  10,000 lpr  10x   X4  3.25 arc-sec  320 rpm
 TTL-.32  10,000 lpr  100x   X4  0.32 arc-sec  160 rpm

T-Max 5

 Encoder Output  Grating Disk  Interpolator*  Quadrature Edge   Detection  Resolution  Max Speed
 Analog 1 V(p-p)  18,000 lpr  In-Controller  Not Applicable  0.02° / cycle
 TTL-1.80  18,000 lpr  10x   X4  1.80 arc-sec  222 rpm
 TTL-0.18  18,000 lpr  100x   X4  0.18 arc-sec  89 rpm

T-Max Series Specifications

Capacities T-Max 2 T-Max 3 T-Max 5
Payload Axial (kg) 10 18 25
Payload Radial (kg) 10 18 25
Hub Diameter (mm) 67 98 136
Aperture Diameter H-7 Tolerance (mm) 9 8 38
Continous Torque (Nm) 0.17 0.9 2.9
Peak Torque (Nm) 0.53 2.45 19.5
All T-Max
Drive Elements Non-contact servo torque motor
Reduction Ratio N/A
Accuracy SP 40 arc-second
Accuracy HP 25 arc-second
Repeatability ± 5 encoder counts
Flatness of Rotation ≤ 6 microns
Concentricity ≤ 4 microns
Wobble ≤ 8 arc-seconds

About Us

NUTEC Mechatronic Systems' positioning is based on perfection. Engineering and design are focused on details and balanced design, flawless fabrication and precision machining to exacting standards and consistent quality.

Nutec Components
631-242-1225
[email protected]
81 Jefryn Blvd E, Deer Park, NY 11729

Quick Links

Working Hours

Call us or email us for formal quotations. We can be reached during the week at these times.

  1. Monday-Friday: 7:30am to 4:00pm
  2. Weekends: Closed

Contact Us

Fill out the form below and we'll get back to you.