Application Development

NUTEC Starts by helping our customers determine the right system for their application. Our dedicated team of engineers will determine the correct products depending on one application. 

Some examples of applications are listed below!

Femto Laser Motion System

Introducing the Femto Laser Motion System. The linear-rotary axis platform LaserLathe is mounted on a Transverse Axis to execute off-center axis cuts under the fixed femto laser beam.

This architecture also allows for controlled motion U-Axis cross cuts with programmable velocities and acceleration-deceleration rates.

The motorized Z-Axis is also programmable and has sufficient payload capacity to carry extensive hard optics for beam delivery. The vertical axis is mounted on a fixed bridge with provisions for hard optics mounting.

The entire motion subsystem is controlled from a NUTEC MICROMATIC-9 4-Axis Digital Servo Control.  With the PCNC system the operator interface is easy and convenient with a Windows™ based Graphic User Interface nuFace serving as an HMI. This GUI is G&M-Code enables to facilitate programming in RS-274 Universal programming language.

Touchscreen enabled display monitor makes it easy for the engineer or operator to interface and control, monitor and command the system. Manual  jog controls and soft keyboard allow full command directly a the system.

Workpiece capacities range from 0,2mm to 13mm diameter [ .008″ to .50″ ] and 250mm [10″ ] travel length to 625mm [24″ ]

MicroMachining Description

Precision Micromachining with Nutec. Each type of application has a set of parameters that are critical to the successful implementation of the process. The following are most common to most systems

  • Accuracy
  • Repeatability
  • Resolution-Smallest Increment of Motion
  • Speed-Acceleration-Constant Velocity
  • Cartesian Axes Orthogonality
  • In-Location Stability


Specs & Precision Level

One of the fundamental aspects of a positioning system is the level of precision that is required.  Since the significant cost driver is the level of accuracy, a system should be carefully  evaluated and specified for the positioning performance required at the point of interest. These are the first parameters that need to be addressed:

  • Travel Range for each axis
  • Payload
  • Accuracy
  • Motion Profile
  • Environment

Once these have been established, NUTEC will analyze and select the most advantageous architecture, translator and control product to achieve the given application parameters. The necessary drive and guide technology will be selected, the position encoding concept decided, control capabilities selected and customer’s preferences considered.

A critical capability in modern micro-machining applications is the ability of a system to

  • make small incremental moves
  • hold a once reached position and be stable
  • make nice round circles, even very small ones
  • control a movement with little velocity variation


NUTEC specializes for many years in custom designs of Granite Based Positioning Systems.

Why Granite ?

There are a number of reasons granite offers advantages over polymer concrete structures:

  • Granite can be manufactured to exceedingly close tolerances, in particular flatness. In order to achieve accuracy, a translator must have an excellent trajectory. The single most significant contributor to accuracy is flatness of trajectory.
  • Modern fabrication techniques permit intricate shapes, geometry and configuration to be created in granite material.  This is a rapid process with material removal form solid monolithic slab.
  • Superb surface finish and appearance
  • Long term stability
  • As opposed to polymer castings, no mold cost are incurred.
  • Leadtimes are short.
  • Depending on the granite material selected, excellent vibration damping with short decay times. Much better than any metal and similar to polymer castings.
  • Granite is a relatively light material; the density is about the same as aluminum alloy.

Granite are the preferred structural material for applications like :

  • Structures for Laser cutting machines
  • Long travel granite stages with high linear trajectory requirements
  • Fixed Gantries with high precision requirements or high accel/decel motion [ the mass of the granite assists in damping and impact absorption]
  • High Speed Moving Bridge Gantries with high accuracy and or flatness requirements
  • Multi Axis Micro Machining Centers for laser technology

About Us

NUTEC Mechatronic Systems' positioning is based on perfection. Engineering and design are focused on details and balanced design, flawless fabrication and precision machining to exacting standards and consistent quality.

Nutec Components
81 Jefryn Boulevard East
Deer Park, NY 11729

Working Hours

Call us or email us for formal quotations. We can be reached during the week at these times.

  1. Monday-Friday: 7:30am to 4:00pm
  2. Weekends: Closed

Contact Us

Fill out the form below and we'll get back to you.