Femto Laser Motion System

Product Summary

This 4-Axis motion Sub-System features a unique

architecture to permit cross axis cutting with hard optics.

Femto Laser Motion System

Introducing the Femto Laser Motion System. The linear-rotary axis platform LaserLathe is mounted on a Transverse Axis to execute off-center axis cuts under the fixed femto laser beam.

This architecture also allows for controlled motion U-Axis cross cuts with programmable velocities and acceleration-deceleration rates.

The motorized Z-Axis is also programmable and has sufficient payload capacity to carry extensive hard optics for beam delivery. The vertical axis is mounted on a fixed bridge with provisions for hard optics mounting.

The entire motion subsystem is controlled from a NUTEC MICROMATIC-9 4-Axis Digital Servo Control.  With the PCNC system the operator interface is easy and convenient with a Windows™ based Graphic User Interface nuFace serving as an HMI. This GUI is G&M-Code enables to facilitate programming in RS-274 Universal programming language.

Touchscreen enabled display monitor makes it easy for the engineer or operator to interface and control, monitor and command the system. Manual  jog controls and soft keyboard allow full command directly a the system.

Workpiece capacities range from 0,2mm to 13mm diameter [ .008″ to .50″ ] and 250mm [10″ ] travel length to 625mm [24″ ]

Automated  refeed of tubing and clamping are standard features.

Laser control is enabled with direct standard I/O or customized interfaces for motion platform specification and features please refer to the  LaserLathe™ specifications on this website.

CALL US: (631) 576-4594